PRODUCT DESCRIPTION Special adhesive for bonding textiles like cotton, felt, jute, linen, denim, canvas and various synthetic fibers with each other or used in combination with other materials like wood, leather and metal. It is resistant to washing, dry-cleaning and ironing. It is transparent when dries, it can be washed (+90°C) and it is solvent free. FIELD OF APPLICATION Suitable for hemming corduroy and denim trousers and jeans, repairing holes and tears in clothing and furnishing materials (e.g. jacks, trousers, tents, deck chairs and windbreaks), applying felt appliqués, edging runners, mats and carpets and fastening textile to wood, block board, chipboard, hardboard and soft board. Not suitable for light-colored PVC with textile back (e.g. white imitation leather, Vistram, Suwide). PROPERTIES • High, immediate adhesiveness· Resistant to wash and dry-clean · For many textiles also in combination with leather · Elastic glue joint· Dries transparent and flexible in approx. 30 minutes· Solvent free PREPARATION Working Conditions: Not to be applied at temperatures below +10°C. Surface Requirements: The surface must be dry, clean and free of dust and grease. Tools: Spatula or small brush. APPLICATION Directions for use; A brush or spatula may be used to apply the glue. In most cases it is sufficient to apply the glue to one side only. The parts may be assembled either immediately or after no more than approx. 5 minutes drying time. After approx. 30 minutes, the assembly can be ironed (iron setting according to the type of fabric; this shortens the bonding time and improves resistance to washing and cleaning. Stains/residue: Fresh specks of glue may be removed with water. Dried-on glue is extremely hard to remove because of the good resistance of the product to solvents and cleaning products.
Chemical base: : Acrylic dispersion Chemicals resistance: : Resistant to washing powders and detergents. Color: : White (Transparent) Color after curing/drying: : Transparent Consistency: : Cream-like Density approx.: : 1,04 g/cm³ Drying/Curing time approx.*: : 5-10 minutes Elasticity: : Good Final bond strength after: : 30 minutes Flexible: : Yes Minimum application temperature: : 10 °C Minimum temperature resistance: : -20 °C Maximum temperature resistance: : 90 °C Moisture resistance: : Good pH-value approx.: : 4,5 Solid matter approx.: : 45 % Solvent free: : Yes Viscosity: : Liquid Viscosity approx.: : 6000 mPa·s Washable: : Yes Water resistance: : Very good * Curing time may vary depending on surface, product quantity used, humidity level and ambient temperature. STORAGE CONDITIONS Store in a dry and cool place.
